Free tool
EV charger installation cost calculator
Answer seven questions, get a realistic cost range for your exact scenario — wire run, panel, trenching, permit, state labor rates. No email, no sign-up, math shown.
Fill in the form and hit Calculate — your line-item estimate appears here.
This estimate is educational and not a quote. Real prices depend on your home, local labor rates, and code requirements. Electrical work should be reviewed by a licensed electrician.
Behind the math
What moves the number most
Wire run distance. Copper and labor scale nearly linearly: every foot past the first ten adds roughly $14–$28 installed. A charger on the opposite side of the house from the panel can cost more in wire than the charger itself.
The GFCI surprise. Recent code cycles require GFCI breakers on many 240V receptacle installs — a $100–$180 part that didn't used to be there. It's a big reason hardwiring (which skips it) now often quotes close to a "cheap outlet" install.
Panel headroom. If a load calculation says your service can't take the charger, the fix ranges from free (dial the charger down to 24A) to $350–$900 (load-management device) to $1,800–$4,500 (service upgrade). Our load calculation guide explains which applies.
State labor rates. The same job quotes ~30% above national average in New York and coastal California, and ~10% below in Texas and Florida. The calculator applies your state's factor to the labor lines only — hardware costs the same everywhere.
Sanity-check the estimate with real quotes
Three itemized bids beat any calculator. Make each one list wire, breaker, permit, and labor separately.
Finding an installer yourself: ask for the contractor's state license number, proof of insurance, and at least two recent Level 2 installs. Get the permit number in writing.
Use the free permit checklist