City permit guide · CA

EV charger permits in Glendale, CA

Glendale publishes EV charging station steps in its permit guidance and separates single-family EVCS from multifamily/commercial EVCS. It also asks for a site plan showing EV equipment location and any driveway or parking-space encroachment.

Quick answer for Glendale, CA

A new Level 2 home EV charger circuit generally requires an electrical permit in Glendale, CA.
Permit path: Electrical permit category for single-family residential EV charging station.
Typical fee guidance: Per Glendale fee schedule and permit portal; verify before payment..
Timeline: Simple single-family EVCS permits can be handled through the city permit workflow; timing depends on completeness and any utility/panel coordination.

Official source: City of Glendale Permit Application Guidance / GWP EV page

Permit required Yes — new 240V circuit

Permit type Electrical permit category for single-family residential EV charging station

Typical fee Per Glendale fee schedule and permit portal; verify before payment.

Apply online Yes · Portal

The process

How it works in Glendale, CA

Permit office: Glendale Building & Safety / Community Development.

Who can pull the permit: C-10 Electrical, B General Building, A General Engineering licensees, and owner-builders may apply for single-family EVCS permits; owner-builder may not apply for multifamily EVCS permits..

Plan review: Single-family EVCS uses the electrical EVCS permit category. Multi-family, condominium, commercial, and mixed-use installs use the separate electrical EVCS path and may require more review.

Typical timeline: Simple single-family EVCS permits can be handled through the city permit workflow; timing depends on completeness and any utility/panel coordination.

Bring these

Documents you'll need

Charger manufacturer spec sheet showing listing, amperage, connector, and hardwired vs plug-in configuration
Panel photo and breaker directory, plus proposed breaker size and charging load
Simple site sketch showing the electrical panel, wire route, charger location, and parking space served
Load calculation when the service is small, the circuit is 40A or larger, or a panel upgrade may be needed
Site plan showing EV equipment location
Construction Permit Declaration for contractor applications

Final step

Inspection notes

Keep the permit, site plan, construction declaration if applicable, charger specs, and panel access ready. Inspectors will verify electrical code and that required driveway/parking dimensions remain usable.

Verified against City of Glendale Permit Application Guidance / GWP EV page on July 4, 2026. Use the linked official source because fees, portal labels, and inspection procedures can change.

Electrical work can be dangerous and is regulated by code. This page is educational, not electrical or engineering advice. Hire a licensed electrician and follow your local permitting process.

Find licensed electricians in Glendale, CA

Ask each bidder to include the permit and inspection in the quoted price — then compare like for like.

Finding an installer yourself: ask for the contractor's state license number, proof of insurance, and at least two recent Level 2 installs. Get the permit number in writing.

Use the free permit checklist

FAQ

Glendale, CA permit FAQ

Do I need a permit for a Level 2 EV charger in Glendale?

Yes. A new 240V Level 2 charger circuit is electrical work and should be permitted through Glendale Building & Safety / Community Development. The local path is: Electrical permit category for single-family residential EV charging station.

Who should pull the EV charger permit in Glendale?

C-10 Electrical, B General Building, A General Engineering licensees, and owner-builders may apply for single-family EVCS permits; owner-builder may not apply for multifamily EVCS permits.

How long does the Glendale EV charger permit take?

Simple single-family EVCS permits can be handled through the city permit workflow; timing depends on completeness and any utility/panel coordination.